STEP 1 Prepare two wash buckets by placing an Adam's Grit Guard Insert in the bottom of each bucket. Fill the first bucket to approximately 3/4 full with clean water and use as your rinse bucket. Place Adam's Professional Wash Pads on top of the Grit Guard at the bottom of the second bucket. Add 1-2 ounces of Adam's Car Shampoo directly onto your Adam's Professional Wash Pad. Use a strong spray from the hose nozzle directly into the Adam's Professional Wash Pad to create thick lather of suds.

STEP 2 Using the Adam's Fire Hose Nozzle spray from top to bottom. Make sure to knock large particles, like bird droppings, loose using the water jet before proceeding. Begin washing the top surfaces of the vehicle with the Adam's Jumbo Professional Car Wash Pad for upper surfaces. Rinse often in the clean water rinse bucket, scrubbing against the Grit Guard to release debris. Reload your Adam's Professional Wash Pad with the Adam's Car Shampoo solution and continue around the vehicle.

STEP 3 Once upper two thirds are completed, switch to the Adam's Professional Wash Pad and complete the lower sections. Make sure to rinse and reload your Adam's Professional Wash Pad often. If your Adam's Car Shampoo starts to dry on your vehicle, no need to worry! Adam's Car Shampoo is perfectly pH balanced so there is no need to rinse as you wash, just let it dry on the surface and rinse the entire car when you finish your wash process.

STEP 4 Rinse the vehicle using Adam's Ultimate Fire Hose Nozzle, making sure to get soap out of tight spots. Adjust your Adam's Ultimate Fire Hose Nozzle to allow a full flow or remove nozzle and continue to rinse, from top to bottom allowing the water to sheet off the surface of your vehicle. This final rinse will reduce the standing water on your vehicle, which will make your drying process faster and easier.

STEP 5 Use Adam's Great White Microfiber Drying Towel to dry, starting with the glass first, then moving to the paint. Work from top down. Wring out the Adam's Great White Microfiber Drying Towel out as needed. Dry wheels with a separate towel. Open the doors, trunk and hood, and dry any pooled water. Close doors, trunk and hood, then inspect exterior, touch up any drips or spots that may have appeared.

PRO TIP! Before you dry, mist the entire vehicle with Adam's Detail Spray to reduce drag, enhance gloss and help to eliminate the chance of water spots or streaks. Spray more Detail Spray during your drying process as needed to counteract water spots or streaking. This process will make the entire drying process faster, easier and the end results will be a streak free shine!